High Pressure Dryer upto 400Bar( Dessicant Type )
The term "desiccant dryer"refers to a broad class of dryers. Other terms commonly used are regenerative dryer and twin tower dryer, and to a lesser extent adsorption dryer.
The compressed air is passed through a pressure vessel with two "towers" filled with a desiccant material. This desiccant material attracts the water from the compressed air via adsorbtion. As the water clings to the desiccant, the desiccant "bed" becomes saturated. The dryer is timed to switch towers based on a standard NEMA cycle, once this cycle completes some compressed air from the system is used to "purge" the saturated desiccant bed by simply blowing the water that has adhered to the desiccant off.
High pressure adsorption compressed air dryer consists from control valves, controller with LED display and two columns filled with desiccant. Springs in the columns make surethat the desiccant beads will not move during operation. Proven robust design enables efficient and reliable operation, fast installation and simple maintenance.
Specifications
| MODEL | Flow rate at 7 Bar,35°C | End Conn. | Dimensions in mm | Weight | ||||
|---|---|---|---|---|---|---|---|---|
| LPM | Nm3/Hr | SCFM | In / Out | Height | Width | Depth | Kg | |
| Series LP | ( Available Pressure rating from 40 Bar to 100 Bar @ regeneration air loss of 4 to 5.5% max ) | |||||||
| LP-68 | 1133 | 68 | 40 | 1/4" | 1325 | 625 | 450 | 50 |
| LP-115 | 1916 | 115 | 68 | 3/8" | 1450 | 625 | 450 | 60 |
| LP-195 | 3250 | 195 | 115 | 3/8" | 1575 | 625 | 450 | 92 |
| LP-382 | 6366 | 382 | 225 | 1/2" | 2125 | 850 | 525 | 116 |
| LP-635 | 10583 | 635 | 375 | 3/4" | 2175 | 850 | 525 | 162 |
| Series - MP | ( Available Pressure rating from 100 Bar to 250 Bar @ regeneration air loss of 4 to 5.5% max ) | |||||||
| MP-100 | 1666 | 100 | 58 | 1/4" | 1350 | 625 | 475 | 65 |
| MP-150 | 2500 | 150 | 88 | 3/8" | 1420 | 625 | 475 | 78 |
| MP-200 | 3333 | 200 | 117 | 3/8" | 1540 | 625 | 475 | 96 |
| MP-250 | 4166 | 250 | 150 | 3/8" | 1410 | 725 | 475 | 104 |
| MP-300 | 5000 | 300 | 176 | 3/8" | 1480 | 725 | 475 | 150 |
| MP-400 | 6666 | 400 | 235 | 1/2" | 1560 | 875 | 550 | 165 |
| MP-500 | 8333 | 500 | 295 | 1/2" | 1620 | 875 | 550 | 185 |
| MP-600 | 10000 | 600 | 350 | 1/2" | 1830 | 875 | 550 | 240 |
| MP-1100 | 18333 | 1100 | 650 | 3/4" | 2110 | 875 | 550 | 290 |
| Series-SP | ( Available Pressure rating from 250 Bar to 400 Bar @ regeneration air loss of 4 to 5.5% max ) | |||||||
| SP-125 | 2083 | 125 | 74 | 1/4" | 1320 | 650 | 475 | 103 |
| SP-225 | 3750 | 225 | 132 | 3/8" | 1380 | 650 | 475 | 130 |
| SP-325 | 5417 | 325 | 190 | 3/8" | 1440 | 650 | 475 | 148 |
| SP-425 | 7083 | 425 | 250 | 1/2" | 1580 | 650 | 475 | 160 |
| SP-525 | 8750 | 525 | 310 | 3/4" | 1620 | 875 | 650 | 240 |
| Operating Conditions | ||||||||
| Normal | Maximum | |||||||
| Inlet Temperature | 25°C to 45°C | 55°C | ||||||
| Dew Point | -40°C | -70°C | ||||||
| Above flow rates are at 7 Bar,35 ℃,Standard Power supply 220V, 50Hz. Optional 12V DC, 24V DC available on request. | ||||||||
| Usage/Application: | ◼ Instrument and Control Air ◼Process Control Instruments ◼ Textile Machines◼Machine tools ◼ Bearing air ◼ Air Motors and Heavy Air motor ◼ miniature◼Packaging machine ◼ Pneumatic cylinder ◼ Sensors in fluid technology ◼ Sand blasting unit ◼ Handling of food and beverages ◼ Semi conductor manufacturing ◼ Wind tunnels◼Pharmaceutical manufacturing ◼ Conveyance of hygroscopic products ◼ Paint spray and Powder coating | |||||||