Single Bag filter Housing
The bag filter is a pressure type water treatment system. The bag filter consists of three parts: a stainless steel housing, a support basket and a filter bag. The inside of the water filter is supported by a metal inner net. The liquid flows into the filter bag from the side inlet of the filter housing. After filtering through the filter bag, the required removal rate is reaching.The impurities are intercepted in the filter bag, and the filter bag can be replaced or cleaned.
Specifications
| Product Name | S.S Single Bag Filter Housing. |
| Brand | Bossmanfilter |
| Housing Type | single bag or multi-bag |
| Filter Type | Filter Bag |
| Bag Type | PP Collar Bag,Rigid Ring Bag,Flange Collar Bag etc. |
| Bag Support | S.S Strainer |
| Body, M.O.C | SS 304/ SS 316/ Carbon steel,MILD STEEL etc. |
| Filter, M.O.C | POLYPROPYLENE, etc |
| Filtration Rating | 0.5, 1 5, 10, 20, 50, 100, 200 to 500µ |
| Filtration Efficiency | 95% |
| Design Pressure | Up to 300Psi |
| Design Temperature | 20℃ to 150℃ |
| Size/Dimension | Standard or ( As per requirement). |
| Seal Type | O-ring or flat gasket. |
| Seal Material | Silicon,NBR, EPDM, Viton, PTFE. |
| Surface treatment | Mirror polishing or electrolytic polishing or Paint. |
| Connections | Inlet/Outlet, Vent,Drain Point.? |
| Inlet/outlet connection | Thread, hoop, flange, TC clamp. |
| Lid/Cover Type | Swing Bolts, flange,etc. |
| Wall Thickness | 2 - 6MM |
| Usage Type | Liquid Filtration. |